2012, 32(3):306-312.

碱性腐蚀环境下接触载荷对钢丝微动疲劳行为的影响

1.?

中国矿业大学 机电工程学院,江苏 徐州 221116

2.?

中国矿业大学 材料科学与工程学院,江苏 徐州 221116

通讯作者: 张德坤, dkzhang@cumt.edu.cn

收稿日期: 2011-10-10

基金项目: The project was supported by the National Natural Science Foundation of China (50875252,51005235) , the Fundamental Research Funds for the Central Universities (China University of Mining and Techology) (2011JQP03) and Ordinary College Graduate Student Research Innovative Projects in Jiangsu Province(CXZZ12_0927).
国家自然科学基金项目(50875252,51005235)、中国矿业大学中央高校基本科研业务费专项资金(2011JQP03)和江苏省普通高校研究生科研创新计划项目(CXZZ12_0927)资助.

Effect of Contact Load on the Fretting Fatigue of Steel Wire under Alkaline Corrosive Environment

1.?

School of Mechanical and Electrical Engineering , China University of Mining and Technology, Xuzhou 221116, China

2.?

School of Materials Science and Engineering, China University of Mining and Technology,Xuzhou 221116, China

Corresponding author: ZHANG De-kun, dkzhang@cumt.edu.cn

Received Date: 10 Oct 2011

引用本文: 赵维建, 张德坤, 张泽锋, 王崧全, 王世博. 碱性腐蚀环境下接触载荷对钢丝微动疲劳行为的影响[J]. 摩擦学学报, 2012, 32(3): 306-312.

Citation: ZHAO Wei-jian, ZHANG De-kun, ZHANG Ze-feng, WANG Song-quan and WANG Shi-Bo. Effect of Contact Load on the Fretting Fatigue of Steel Wire under Alkaline Corrosive Environment[J]. TRIBOLOGY, 2012, 32(3): 306-312.

以矿用钢丝为研究对象,在自制的钢丝微动疲劳试验机上开展钢丝在碱性腐蚀环境下的微动疲劳试验,考察钢丝在应变比为0.8时不同接触载荷下钢丝的微动运行特性,并用光学显微镜和扫描电子显微镜观察钢丝的磨痕和断口形貌,分析其微动磨损和疲劳断裂机理.结果表明:不同接触载荷下钢丝的摩擦系数具有相同的变化趋势,均可以分为4个阶段:跑合期、上升期、下降期和稳定期;4种不同接触载荷下钢丝摩擦副均运行于滑移状态,磨损机制以腐蚀磨损、磨粒磨损、疲劳磨损和塑性变形为主;钢丝疲劳寿命与磨损量成反比,疲劳断口可分为3个区:疲劳源区、扩展区和瞬断区.

关键词: 钢丝, 碱性腐蚀液, 微动疲劳, 断裂机理
[1]

Ge S R,Qu R L, Xie W Y. Mine hoist reliability technology[M]. Xuzhou: China University of Mining and Technology Press, 1994(in Chinese)[葛世荣,曲荣廉,谢维宜. 矿井提升机可靠性技术[M]. 徐州:中国矿业大学出版社,1994].

[2]

Shen Y,Zhang D K,Wang S Q,et al.Fretting behaviors of steel wires as hoisting ropes for coal mine in corrosive media[J].Tribology,2011,31(1):66-71(in Chinese)[沈燕,张德坤,王崧全,等. 矿用钢丝在腐蚀介质环境下的微动行为研究[J]. 摩擦学学报,2011,31(1):66-71].

[3]

Lü Y C, Guo H L,Shen Z J,et al Failure analysis of steel wire[J]. Steel Wire Products,2010,36(3):69-72(in chinese)[吕英臣,郭合理,沈志军,等.录井钢丝的失效分析[J].金属制品,2010,36(3):69-72].

[4]

Zhao X Z,Gao W,Zhao M Y.Wear characteristics of aluminum cable steel reinforced(ACSR) under dry and acidic conditions[J]. Tribology,2011,31(6):616-621(in Chinese)[赵新泽,高伟,赵美云,等.干燥和酸性条件下钢芯铝绞线磨损特性研究[J]. 摩擦学学报,2011,31(6):616-621].

[5]

Ding H Y,Dai Z D.Fretting wear characteristics of titanium alloy in seawater[J]. Rare Metal Materials And Engineering,2007,36(5):778-781(in Chinese)[丁红燕,戴振东.钛合金在海水中的微动腐蚀特性[J].稀有金属材料与工程,2007,36(5):778-781].

[6]

Lin Y B,Li N L,Li Q. Influence of seawater on fretting behavor of LY12Aluminum alloy[J].Lubrication Engineering,2009,34(9):51-56(in Chinese)[林岳宾,李年莲,李晴.海水环境对LY12微动摩擦学行为的影响[J].润滑与密封,2009,34(9):51-56].

[7]

Diomidis. Tribocorrosion of stainless steel in sulfuric acid: Identification of corrosion-wear components and effect of contact area[J]. Wear , 2010 (269): 93-103.

[8]

Ren P D.Study on the fretting corrosions behavior of steels[D].Chengdu:Southwest Jiaotong University,2005(in Chinese)[任平弟. 钢材料微动腐蚀行为研究[D].成都:西南交通大学,2005].

[9]

Kuroshima. Fatigue properties of very thin steel wire under fluctuating tension[J]. Journal of the Society of Materials Science,1995(44):551-556.

[10]

E Navaei Alvar, J Aghazadeh Mohandesi. Fatigue damage accumulation in cold-drawn patented steel wire under variable loading[J]. Materials and Design,2010(31): 2 018-2 024.

[11]

Zhang Dekun. Fretting wear behavior of steel wire and fretting fatigue behavior[D]. Xuzhou:China University of Mining and Technology , 2005(in Chinese)[张德坤. 钢丝的微动磨损及其微动疲劳行为研究[D] . 徐州:中国矿业大学, 2005].

[12]

Zhou Z R. The study of fretting wear and fretting fatigue[J]. Chinese journal of machanical engineering, 2000,11(10):1 146-1 150 (in Chinese)[周仲荣. 关于微动磨损与微动疲劳的研究[J]. 中国机械工程,2000,11(10):1 146-1 150].

[13]

Vingsbo O, Odfalk M, Shen N E. Fretting maps and fretting behavior of some FCC metal alloys[J]. Wear, 1990,138:153-167.

[14]

Zhang D K, Ge S R, Zhu Z C. Friction and wear performance on fretting wear of steel wires [J]. Journal of China University of Mining and Technology, 2002, 31(5):367 - 370(in Chinese).

[15]

Berthier Y, Vincent L, Godet M. Fretting fatigue and fretting wear [J]. Tribology International,1987,22: 235-242.

[16]

Pearson B R, Brook P A, Waterhouse R B. Fretting in aqueous media, particularly of roping steels in seawater[J]. Wear, 1985, 106: 225-260.

[17]

Zhang D K, Ge S R. Fatigue performance of steel wires with fretting worn notch [J]. Chinese journal of mechanical engineering, 2006, 42(1):173-177(in Chinese)[张德坤,葛世荣. 带有微动磨损缺口钢丝的疲劳特性[J]. 机械工程学报,2006,42(1):173-177].

[18]

Wang C H, Yao G, Yin W Q. Analyses of axial fatigue and fracture characteristics of small diameter wire rope[J]. Steel Wire Products,2001, 4 (2): 35-38(in Chinese)[王春晖, 姚戈, 尹万全.小直径钢丝绳的轴向疲劳断裂特征分析[J].金属制品,2001, 4 (2): 35-38].

[1]

. 钢丝微动磨损的评定参数及理论模型研究[J]. 摩擦学学报, 2005, 25(1):-312.

[2]

殷艳, 张德坤, 沈燕. 润滑油脂对钢丝微动磨损特性的影响[J]. 摩擦学学报, 2011, 31(5):-312.

[3]

张晓化, 刘道新, 王小锋, 唐宾. TIN / Ti 复合膜与多层膜对Ti811 合金高温摩擦性能及微动疲劳抗力的影响[J]. 摩擦学学报, 2009, 29(4):-312.

[4]

张远彬, 鲁连涛, 宫昱滨, 曾东方. 微动磨损对过盈配合结构微动疲劳性能的影响[J]. 摩擦学学报, 2016, 36(4):-312. doi: 10.16078/j.tribology.2016.04.014

[5]

. 经不同表面改性处理的钛合金的微动疲劳和微动磨损行为对比研究[J]. 摩擦学学报, 2005, 25(1):-312.

[6]

. MoS2/Ti复合薄膜对Ti811合金高温摩擦磨损性能及微动疲劳行为的影响[J]. 摩擦学学报, 2008, 28(3):-312.

[7]

. 中碳结构钢微动疲劳性能的研究[J]. 摩擦学学报, 1999, 19(4):-312.

[8]

. 钢丝的微动磨损及其对疲劳断裂行为的影响研究[J]. 摩擦学学报, 2004, 24(4):-312.

[9]

沈燕, 张德坤, 王崧全, 张泽峰, 葛世荣. 矿用钢丝在腐蚀介质环境下的微动行为研究[J]. 摩擦学学报, 2011, 31(1):-312.

[10]

沈燕, 张德坤, 王大刚, 许林敏. 接触载荷对钢丝微动磨损行为影响的研究[J]. 摩擦学学报, 2010, 30(4):-312.

[11]

. 矿井提升机用提升钢丝绳的微动磨损行为研究[J]. 摩擦学学报, 2001, 21(5):-312.

[12]

. 金属橡胶隔振构件中不锈钢丝的微动摩擦磨损性能研究[J]. 摩擦学学报, 2008, 28(3):-312.

[13]

. 边界润滑状态下轴承钢接触疲劳寿命与其断裂特性参数相关性的试验研究[J]. 摩擦学学报, 1988, 8(1):-312.

[14]

. Ni-P和TiN涂层的微动疲劳特性[J]. 摩擦学学报, 1993, 13(4):-312.

[15]

张俊, 彭金方, 徐志彪, 金潇, 朱旻昊. 7075铝合金扭转微动疲劳行为研究[J]. 摩擦学学报, 2017, 37(6):-312. doi: 10.16078/j.tribology.2017.06.018

[16]

. 数值方法在微动疲劳研究中的应用进展[J]. 摩擦学学报, 2000, 20(4):-312.

[17]

. 热喷涂层抗车轴微动疲劳的研究[J]. 摩擦学学报, 1999, 19(3):-312.

[18]

刘道新, 王振亚, 张晓化, 刘国华, 唐宾. Ag/Ni多层膜对钛合金微动磨损和微动疲劳抗力的影响[J]. 摩擦学学报, 2010, 30(5):-312.

[19]

魏超, 彭金方, 刘曦洋, 刘建华, 蔡振兵, 朱旻昊. CuMg0.4合金弯曲微动疲劳损伤特性研究[J]. 摩擦学学报, 2018, 38(6):-312. doi: 10.16078/j.tribology.2018041

[20]

杨茂胜. 微动对LY12CZ铝合金材料疲劳寿命的影响[J]. 摩擦学学报, 2012, 32(3):-312.

  • 计量
    • PDF下载量 (1163)
    • 文章访问量 (7862)
    • 引证文献数? (0)
    目录

    Figures And Tables

    碱性腐蚀环境下接触载荷对钢丝微动疲劳行为的影响

    赵维建, 张德坤, 张泽锋, 王崧全, 王世博